Hey Rick,
Yep, the 3-step MORryde StepAbove RV Steps # MR68RR will indeed work for your Keystone Montana. These steps are designed for 30" to 33-1/2" ground to threshold measurements and doorways that are are 27-3/4" to 30-1/4" wide.
Since you have a 30" height and 28-1/4" wide doorway you can definitely use the # MR68RR. view full answer...
Hey Eric, so to find out if the Lippert Manual Pull Out Steps # LC432682 are going to work with your 2022 Forest River Rockwood Freedom Camper you're going to need to locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. These steps require a mounting space that is at least 25-1/2" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, then you'd need a different set that has bracket sizes ranging... view full answer...
Thanks for the information! I have a couple of options for you that I have listed below which ones you go with will be determined by the bed length of your 2007 Chevy Silverado 2500HD.
2007 Chevy Silverado 2500HD with a 6-1/2' Bed
TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2205
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLC3205
2007 Chevy Silverado 2500HD with a 8' Bed
TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2204
TorkLift... view full answer...
To find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth.
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match... view full answer...
There isn't any fit guide that is going to have that information, but you can easily take a couple quick measurements to figure that out. You'll just need to measure the width and depth of the available space underneath your camper that lines up with the door frame. If you have at a space that is at least 25" W x 6" deep then the Flexco Steps # SMFP-1100 will work for you.
If you have different measurements, let me know what that Is and I'd be happy to find you something else. view full answer...
Hey Ken, we have verified in the pas that the Camco RV fridge vent cover part # CAM42163 works with the Atwood fridges like what you have and is black in color.
The Lippert steps part # LC432690 that you referenced would also work great as a replacement step setup as well. This matches the dimensions you need and would work great. view full answer...
Hi Cheryl,
Since a 2021 Aliner Ranger 12 camper doesn't come with a steel 4" x 4" bumper you'd have to have one welded to the frame before you'd be able to mount the The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR. You'd need at minimum 1/2" of clearance between the body of the camper and the bumper in order to get the mounting brackets for the carrier in place. You'll also need to check with capacity if the bumper with whoever welds it into place to ensure that it's strong enough... view full answer...
You will need a minimum of 10 inches of clear space inside your trailer for the double step Lippert SolidStep RV Steps for 25" - 28-7/8" Wide Doorways # LC733931.
Then for the threshold/lip that can be up to an inch for the install of the steps. view full answer...
Hi Frank,
The TorkLift A9004 can be purchased with part # TLA9004. These steps are designed to fit a 28" doorway width (B) and 27-3/8" to 34-7/8" entry height (A). If you find your measurements differ then let me know and we can find the correct replacement. view full answer...
Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step # TL52SR will work perfect for your coach.
These steps are going to be an awesome upgrade from your OEM steps on your 2024 Heartland Eddie Bauer, has a nice 325 lb capacity, and glows in the dark for up to 10 hours with only 5 minutes of light exposure (neat!).
If you need anything else, don't hesitate... view full answer...
Based on your measurements the # MR78RR would be the correct option from MORryde. We also have the strut assist version available which is # MR65RR. The doors may not close properly if the threshold is outside of the 5/8" - 3/4" range so you might need to add some extra material to the threshold to use either of these.
We do have steps with an 8" rise that will fit your doorway width of 28" and entry height of 34". The Lippert SolidStep RV Steps # LC791572. The steps aren't quite as wide... view full answer...
I took a look at the dimensions of your 2020 Aliner Expedition Camper. My information shows your camper measuring 18' long x 7-1/4' wide x 5-1/2' tall. With this in mind we are going to have to go with a cover not meant for a pop-up trailer like item # 290-12295 because of the height difference.
I recommend the Adco Olefin HD RV Cover for Travel Trailers up to 18' item # AD37ZR. This cover measures 18' 2" long x 8' 3" wide x 7' 6" tall. It has been built to survive in all climates and... view full answer...
The internal tray dimensions of the 22-3/4" x 16-1/2" MORryde RV Generator Slide Out Tray # MR49RR are 21" long x 14" wide x 2-3/4" tall which according to my research means it will accommodate up to 2 golf cart batteries.
The MORryde RV Fridge Tray # MR39RR is the next step up with internal dimensions being 24-13/16" long x 14" wide x 2-1/2" tall which should be able to handle 3 batteries (provided they don't exceed the 225 lb weight limit), but it doesn't look like any or our trays will... view full answer...
We do offer a variety of different trims, and we very well may have the correct trim for the entry door on your 2018 Montana High Country HM381TH. Unfortunately, there is no way for us to cross reference a model of camper to know exactly what size/shape of trim you will need. The best way to find the correct trim is to take a measurement and look at the profile of the current trim. Then we can compare to our stock and see if we have a match.
A very common trim that we see on a lot of... view full answer...
Tony I really wish I could but that information isn't available online. You'll need to open up your roof and take some measurements and see what you're working with or contact Palomino directly but I have a feeling they're going to tell you to do the same thing.
What I can tell you is the Advent Air RV Air Conditioner System item # ACM135C you were looking at requires a 2-1/2" - 5" thick roof and 16" on center rafters or joists. The AC unit alone weighs 68 lbs so you will want to verify... view full answer...
The Adco Olefin HD RV Cover # AD27ZR has 3 separate sections on the passenger side which can be opened to access the front or rear door on your 2023 Coleman Light 2715RL. I see you were looking at the larger Cover # AD59ZR but this is going to be too long for your Coleman since the overall length of your camper is 31.92' and the dimensions listed are for the box only. view full answer...
I am sorry but I am not going to be much help either. We only have one under mounted sink bowl and it is the LaSalle Bristol Single Bowl RV Bathroom or Bar Sink item # 34413M111. It has an exterior measurements of 10-1/2" diameter x 4-1/2" deep. view full answer...
Hi John,
When replacing your equalizers it's best to match the bolt hole spacings to prevent having to switch out/alter your other suspension components to fit the new spacing. You'll need to measure the horizontal distance between the shackle strap bolt holes and the vertical distance from the hanger bolt hole down to the center of the shackle strap bolt holes. Let me know what measurements you have on the current equalizers and I'd be happy to look for the correct fit. view full answer...
Thanks for the info and photos, Joe!
From what I'm seeing in your photos it looks like the Mini-Illuminated 12V Switch # 37212765 could be a great option for you.
The switch measures 1-1/4" tall x 3/4" wide x 3/8" deep and fits a cutout of 3/4" tall x 1/2" wide. If this matches what you have then you'll be good to go! Otherwise Let me know what the dimensions of are your switches you need to replace and let me know what you have so I can compare that with our selection. view full answer...
Go To Results